Connect over encrypted FTP with FileZilla
Set up FileZilla to reach your Plesk hosting over FTPS (explicit FTP over TLS), upload your files to httpdocs and fix common connection errors.
On this page
Your values
Enter them once and the commands in this guide update.
This guide shows you how to connect FileZilla to your Plesk hosting over an encrypted connection and upload your website files to the right place.
Plain FTP sends data unencrypted, including your username and password. Plesk therefore recommends FTPS (FTP over SSL/TLS). By default, Plesk accepts explicit FTPS: the connection starts on the usual FTP port, then switches to TLS before your password is sent.
What you need
- Access to your Plesk interface.
- The FileZilla client, downloaded from the project's official website.
- A domain name that already points to your hosting.
Step 1: find your FTP credentials
- Log in to Plesk.
- Open Websites & Domains, then your domain.
- Under Hosting & DNS, click Web Hosting Access.
- Note the username shown there.
These are the credentials of your subscription's system user. They may differ from the ones you use to log in to Plesk. If you have forgotten the password, set a new one on the same page or follow Change your FTP password.
Step 2: create the site in FileZilla
The Site Manager lets you enforce encryption, which the Quickconnect bar does not make obvious.
- Open File > Site Manager.
- Click New Site and name the connection.
- On the General tab, fill in the following fields.
| Field | Value |
|---|---|
| Protocol | FTP - File Transfer Protocol |
| Host | your-domain.com |
| Port | Leave empty to use the standard FTP port (21) |
| Encryption | Require explicit FTP over TLS |
| Logon Type | Ask for password |
| User | The username from step 1 |
- Open the Transfer Settings tab and select Passive mode. This is the recommended mode behind a firewall or home router.
With Ask for password, your password is not stored on your computer. This is a useful precaution, because malware on a workstation can steal the FTP credentials saved there.
Step 3: connect and check the certificate
- Click Connect and enter your password.
- On the first connection, FileZilla shows an Unknown certificate window. This is expected: it is asking you to validate the server's certificate.
- Check that the certificate is still valid and look at the hostname it shows.
Plesk uses the same certificate for FTPS as for the panel. It may therefore carry the server's name rather than your domain, which triggers a hostname warning.
If the name or validity dates look wrong, do not accept the certificate. Ask support to confirm it through your client area. Once it is confirmed, tick the box that trusts it for future sessions and accept.
Step 4: upload your files
- In the Remote site pane (right), open the
httpdocsfolder. This is the web root of your main domain. - In the Local site pane (left), open the folder containing your website.
- Select the files, right-click and choose Upload.
- Check the tabs at the bottom of the window for failed transfers.
A subdomain or additional domain can have its own root folder. If in doubt, check the domain's hosting settings in Plesk.
Check the result
Encryption is active if the message log at the top of FileZilla contains these lines:
Status: Initializing TLS...
Status: TLS connection established.
Status: Logged in
Status: Directory listing of "/" successfulA padlock also appears in the status bar at the bottom right.
You are in the right folder if a test file is visible online:
- Upload a
test-ftp.txtfile tohttpdocs. - Open
https://your-domain.com/test-ftp.txtin your browser. - Delete the file when you are done.
Give a collaborator limited access
Avoid sharing your main credentials. Create a dedicated account restricted to one folder instead:
- Open Websites & Domains, your domain, then FTP (or FTP Access).
- Click Add an FTP Account.
- Fill in FTP account name, Home directory and FTP password.
- Click OK.
Troubleshooting
| Message or symptom | Likely cause | What to do |
|---|---|---|
530 Login incorrect or Authentication failed |
Wrong username or password | Check the username from step 1, retype the password without spaces, or set a new one |
Connection timed out or Could not connect to server |
Wrong host, domain not pointing to the hosting, or port blocked on your network | Check the domain and try another connection, such as a mobile hotspot. If it persists, contact support with your public IP address |
ECONNREFUSED |
The server or a device along the way refuses the connection | Check the host and port, then your local firewall |
Failed to retrieve directory listing |
The control connection works but the data connection is blocked | Make sure Passive mode is on, then allow FileZilla through your firewall |
Message containing does not support FTP over TLS |
Encryption is not offered on the address you used | Do not turn encryption off. Check the host and contact support |
| Certificate hostname warning | The certificate carries the server's name | Follow step 3 and have support confirm the certificate |
GnuTLS error during a transfer |
The TLS session was interrupted, sometimes by an antivirus or firewall inspecting traffic | Retry the transfer and check your antivirus FTP scanning options |
550 Permission denied or 553 Could not create file |
Insufficient rights, or a folder outside the account's scope | Check the destination folder and the file permissions |
552 or Disk quota exceeded |
The subscription's disk space is full | Free up space, starting with old backups |
| The file uploads but the site does not change | Wrong folder or cache | Make sure you are in httpdocs, then clear your browser and site caches |
Further reading
- Back up and restore your website
- FTP Access to Your Websites, official Plesk documentation